1) without fuel and cutter blade
The new 2-MIX engine features an advanced stratified charge system that boosts power, whilst reducing consumption and pollution, significantly lowering unburned hydrocarbons in the exhaust. The result is a cleaner, more fuel efficient engine
The long-life air filter system with cyclone air routing ensures that 80% of dust particles are separated and transported out into the surrounding air. In turn this extends the cleaning intervals for the foam pre-filter.
Buffer and spring elements reduce the transmission of engine vibrations to the operator's arms and hands. This makes free-hand cutting much less strenuous.
Water is supplied to the cutting wheel through the standard water connection with sprinkler system to suppress the dust produced during cutting. It is supplied to the device in such a way so as not to interfere with your work.
If your petrol driven equipment has a manual fuel pump, you can reduce the number of starting strokes by about 40% if you operate the pump a few times before starting up. This speeds up the supply of sufficient fuel to start up.
Light, consistent re-tensioning increases the service life of the belts and shaft bearings.
This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.
The decompression valve is part of the easy start-system. The valve reduces pressure in the cylinder which means less effort is required to start the engine.
The modern, ergonomic design allows each user to work with an optimal grip position. The loop handle facilitates excellent cutting comfort in any working position.
This standard or retrofitted starter grip allows smooth starting without abrupt power Peaks, making starting the machine considerably easier.
Ideal wherever edges have to be cut with particular precision, where a certain cutting depth needs to be maintained, or for cutting long, linear stretches.
Discounts, special offers, news and new arrivals.
NC Equipment Ltd