Hubbards 20′ 310 Cultivator c/w crumblers

6.5m Hubbard’s folding Maxi Till designed for secondary & finishing cultivation.
Running the heavy 45mm “S” tine with cast points.
FREE set of points supplied with machines for the next buyer.
Crumblers recently replaced so in good condition. Been workshop checked & serviced.

“Ask about our NCE used dealer warranty”

Service Notes;
Steam cleaned the machine and removed twine, string, etc. from the crumbler bearings.
Freed up and lubed the main pivot pins for both wings and made up a new pivot pin.
Removed the wheels and checked & repacked the wheel bearings as required.
Replaced one tyre and reset both to the correct pressure. Replaced four worn tines and checked all tine bolts.
Replaced only the broken points where needed.
Replaced broken grease nipples on axle mounts and replaced pins and fitted new turnbuckle adjuster.
Greased and lubed where needed. Set up on the tractor and tested hydraulics OK.