%label%
%sku%%description%
Compliment a rear-mounted three-point linkage Hustler’s Applic8r sprayer by increasing your capacity with the fitment of an 890L or a 1150L front mount spray module.
The short length of an Applic8r front tank gives them game-changing maneuverability compared to other front tank designs especially important in tight gateways, they look great and it reduces the load on the front axle of the tractor
The kit comes complete with 8 metres of hose, ball value, and coupling to connect to the rear tank. When ordered with an Applic8r Spray unit, front tank valving is factory fitted to sprayer.

We understood the dangers of climbing onto sprayers with chemicals or to see inside the tank. So with careful tank/chassis integration, we’ve kept it compact and ultra-low to ensure great visibility and with a small overhang makes for great maneuverability

Filling’s a snap, fill as you normally would through the lid or with our unique CoupleUp™ 2” tank filling system, if you have a mixing station or trash pump you can fill directly using that pump, or you can also utilise the Applic8r’s own pump to fill out of a trough or stream with an optional 5 or 10 metre filling hose.

Our unique ViziGauge is visible from 120 degrees, so you can easily see your tank level from the tractor seat and the ground how much fluid you have left. A floating ball tube gauge makes it easy to read the calibrated ViziGauge™ which now features both Gallons and Litres and provides more tank filling accuracy with our unique mould-in permanent graphics

The Applic8r’s 3 point mounts are built to ISO standard unlike most other sprayers. This means you no longer need to park your sprayer on a stack of pallets so the 3 point linkage can reach it and it fits both fixed and floating 3 point linkage arms making it quicker and safer to hook up.

A tough built-in SkidPlate™ protects the vital parts including the pump, tank, filters, drain, from damage should you misjudge a hump or hollow.

Integrated into the design is a handy toolbox that is quick and easy to open and has plenty of space for spare nozzles, filters and is also handy for storing controllers when the sprayer is not in use.

The optional StorageBox is big enough to take chemicals, filling hos and measuring jugs with you on the job to save you having to carry them in the cab. Not available with the optional ErgoMax™ induction hopper or the foam marker.

A high flow tank dump operated from the top of the tank saves you from climbing underneath to empty the tank and reduces clean up time and saves the operator from getting covered in chemical during clean up.

Built-in 18-litre tank for clean water so that you can wash your hands once finished filling makes sprayer with an Applic8r enjoyable.
| Tank Size: | 890L |
| Flushing Tank: | Optional 100L |
| Hand Washing Tank: | 18L capacity |
| Storage: | Built in toolbox |
| Gauge: | ViziGauge view |
| Lid: | Hingend 455mm lid with basket strainer |
| Features: | UtilityBar, CoupleUp tank filling system |
| Tank Size: | 1150L |
| Flushing tank: | Optional 100L |
| Hand washing tank: | 18L capacity |
| Storage: | Built in toolbox |
| Gauge: | ViziGauge view |
| Lid: | Hingend 455mm lid with basket strainer |
| Features: | UtilityBar, CoupleUp tank filling system |
Specs are subject to change without notice
*Finance calculation based on selected term period, selected deposit and with an example annual fixed interest rate of 10.95% p/a. Actual interest rate may be higher or lower. All finance packages include an additional establishment fee and a monthly maintenance fee. Estimate only, not an offer of finance. Terms, conditions and lending criteria apply.