Home > Farm Equipment > Ferris ISX3300 Zero Turn Mower

Ferris ISX3300 Zero Turn Mower

Featuring the next generation of Ferris suspension technology – ForeFront™ Suspension, a 2-belt iCD™ cutting system, heavy-duty Hydro-Gear® drive system and travel speeds up to 19.3 kph, the ISX™ 3300 is engineered to increase efficiency and operator comfort.
Starting from: $34,056.00 (excl GST)

THE LEADER IN SUSPENSION TECHNOLOGY FOR TURF

Featuring the next generation of Ferris suspension technology – ForeFront™ Suspension, a 2-belt iCD™ cutting system, heavy-duty Hydro-Gear® drive system and travel speeds up to 19.3 kph, the ISX™ 3300 is engineered to increase efficiency and operator comfort.

Deck Size
60 - 72 "
Power Rating*
40 HP+
Ground Speed
19 Kph
Limited Warranty†
4 Years

NEW! iCD™+ Cutting System

Redesigned to deliver next-level performance, increased durability and superior results.

NEW! USB Port

USB Type A & C located on the dash panel for easy access and charging. 2.1A x 2 output and moisture rated to IP67.

Forefront™ Suspension System

The system utilises four upper and lower control rods and mower-specific shocks that ensure the front caster bearing remains vertical through the full range of travel. This controlled motion results in a smoother ride, more precise tracing of the terrain and an improved cut.

Ride-On Mower Warranties†

Coil-Over-Shocks and all suspension-related components are covered for 5 years (60 months), for unlimited hours. We are committed to providing performance, productivity and durability.

500 Hour Oil Change

Vanguard™ Engines with Oil Guard™ System reduce maintenance time and costs by up to 60%.**

Premium High-Back Suspension Seat

Mow in superior comfort with arm rests, multi-position head rest, adjustable lumbar and seat recline

Drive System

Dual, commercial Hydro-Gear® ZT-5400 Powertrain® transaxles with 9" cooling fans

Hercules™ II Spindles

Hercules™ II spindles; 10" dia. cast-iron with industrial double row angular contact ball bearing with 1 3/16" dia. shaft. Contact ball bearings with 1 3/16" dia. shaft.

Vanguard Electronic Throttle Control

This new technology allows the engine to harness all the power that is generated for more consistent blade tip speed. (select models)

Photo Gallery

Options & Specifications

Engine BrandVanguard® BIG BLOCK™ EFI with Oil Guard™ and Electronic Throttle Control
Engine Power Rating (HP) *40
Displacement (cc)993
PTOElectric
Cylinders2
StarterElectric
Fuel Tank Capacity (litres)41.6
Cutting Width in(cm)60 (152)
Cutting Height in(cm)1.5 - 5 (38 - 127)
SpindlesHercules™ II cast-iron
Deck ConstructioniCD™+ Cutting System, 2-Belt
Deck Discharge TypeSide Discharge
SuspensionForeFront™ Suspension System - Front independent with four control rods paired with large size adjustable coil-over shocks and a rear swing with large adjustable coil-over shocks.
TransmissionDual-commercial Hydro-Gear® ZT-5400 Powertrain® transaxles with 9" cooling fans
Drive Axles (in)1.375
Caster Tyres (in)13 x 6.5 - 6
Drive Tyres (in)26 x 12-12
Ground Speed-Fwd (kph)0 - 19.3
Ground Speed-Rev (kph)0 - 8.1
Overall Length (mm)2147
Overall Width (mm) Deflector Down / Up1880 / 1651
Dry Weight (kg)742
Seat PackagePremium high-back suspension seat with arm rests, adjustable lumbar and back recline
InstrumentationDual-function hour meter, fuel level gauge in each tank
ROPS (Rollover Protection System)165° foldable
Controls / Safety GroupSeat activated engine kill, clutch safety switch, neutral and parking brake safety circuit, adjustable twin steering controls
Parking Brake / Safety CircuitHand operated internal transaxle brake
Warranty (Engine) †3-Year limited manufacturer's warranty
Warranty (Balance of Machine) †4-Year limited warranty (48 months) or 500 hours, whichever occurs first. Unlimited hours during the first 2 years (24 months). Coil-over-shocks and all suspension related components are covered for 5 years (60 months) unlimited hours. Coverage on other components varies, please see operator’s manual for complete details.
Engine BrandVanguard® BIG BLOCK™ EFI with Oil Guard™ and Electronic Throttle Control
Engine Power Rating (HP) *40
Displacement (cc)993
PTOElectric
Cylinders2
StarterElectric
Fuel Tank Capacity (litres)41.6
Cutting Width in(cm)72 (183) Side or rear discharge
Cutting Height in(cm)1.5 - 5 (38 - 127)
SpindlesHercules™ II Cast-Iron
Deck ConstructioniCD™ Cutting System, 2-Belt
Deck Discharge TypeSide Discharge or Dedicated Rear Discharge
SuspensionForeFront™ Suspension System - Front independent with four control rods paired with large size adjustable coil-over shocks and a rear swing with large adjustable coil-over shocks.
TransmissionDual commercial Hydro-Gear® ZT-5400 Powertrain® transaxles with 9" cooling fans
Drive Axles (in)1.375
Caster Tyres (in)13 x 6.5 - 6
Drive Tyres (in)26 x 12-12
Ground Speed-Fwd (kph)0 - 19.3
Ground Speed-Rev (kph)0 - 8.1
Overall Length (mm)2147
Overall Width (mm) Deflector Down / Up2185 / 1880
Dry Weight (kg)717
Seat PackagePremium high-back suspension seat with arm rests, multi-position head rest, adjustable lumbar and back recline
InstrumentationDual-function hour meter, fuel level gauge in each tank
ROPS (Rollover Protection System)165° foldable
Controls / Safety GroupSeat activated engine kill, clutch safety switch, neutral and parking brake safety circuit, adjustable twin steering controls
Parking Brake / Safety CircuitHand operated internal transaxle brake
Warranty (Engine) †3-Year limited manufacturer's warranty
Warranty (Balance of Machine) †4-Year limited warranty (48 months) or 500 hours, whichever occurs first. Unlimited hours during the first 2 years (24 months). Coil-over-shocks and all suspension related components are covered for 5 years (60 months) unlimited hours. Coverage on other components varies, please see operator’s manual for complete details.

Specs are subject to change without notice

We reserve the right to change specifications, features and pricing without notice. Products may vary from images shown.
* Power levels rated by engine manufacturer.
† See operator’s manual or dealer for complete warranty details. Refer to engine operator’s manual for engine warranty.
** Cost savings based on oil maintenance with 100 hour interval versus Oil Guard System 500 hour service interval.

Tyre Wise Fee Applies With This Product
Please note that the Tyrewise fee of $36 applies. Tyrewise is Aotearoa New Zealand's national product stewardship scheme for recycling end-of-life tyres. Funded by a stewardship fee on new tyre purchases, it aims to prevent used tyres from being dumped or sent to landfills and instead repurpose them into new products.

Need More Info?

Steve Gregor

Commercial Ride-on Mower Specialist
New Zealand

TurfForce, a division of NC Equipment, is your go-to for ride-on mowers and turf equipment. As New Zealand’s largest stockist of ride-on mowers, we provide trusted advice and high-quality machinery to help you maintain your property efficiently.

Whether you’re a farmer managing large areas or a homeowner looking to enhance your outdoor space, our equipment ensures you get the job done faster and easier. Backed by over 50 years of expertise, TurfForce is here to help you and your lawn thrive.

Get In Touch

Are you interested in:

Finance Calculator

Need a heads up on your finance? Use our calculator below.
Step 1 of 2
3 years
7.5%

*Finance calculation based on selected term period, selected deposit and with an example annual fixed interest rate of 10.95% p/a. Actual interest rate may be higher or lower. All finance packages include an additional establishment fee and a monthly maintenance fee. Estimate only, not an offer of finance. Terms, conditions and lending criteria apply.

Shopping Cart
Scroll to Top